Skip to content
AESTECHNO
AESTECHNO
Contact
Free resource

Connector and interface design checklist.

A pinout table tells you which signal sits on which pin. It does not tell you how to get that signal onto your board without a mirrored footprint, a missing ESD path, a broken impedance or a shield that radiates. This checklist covers what to review on every external interface of a board, from USB-C and Ethernet to M.2, SATA and debug headers.

Written by our electronics design house for schematic and layout reviews. Printable, with boxes to tick, usable on your own design before you release it to the PCB fab.

  • Connector choice: current per contact, mating cycles, locking, keying, mechanical retention and second source

  • Pinout and footprint: numbering view, mirrored footprints, cable crossovers, 3D check against the enclosure

  • Protection: ESD to IEC 61000-4-2, low-capacitance TVS on fast lines, hot plug, reverse polarity, short to supply

  • Signal integrity: differential impedance, length matching, reference planes, AC coupling, stubs

  • Shielding and EMC: shell to chassis, ground pins, common-mode filtering, return paths at the connector

  • Validation: continuity, compliance and eye tests, ESD gun pre-scan, mechanical and production tests